This tutorial demonstrates how to integrate Telega-based controllers with ArduPilot based flight controllers using ArduPilot mission planner. The documentation for ArduPilot is available at

UAVCAN is supported in the following APM firmwares:

This tutorial is demonstrated on APM firmware v4.1.0-dev. Myxa telemetry is not supported on lower versions.

Software Installation

Mission Planner is a ground control station for Plane, Copter and Rover. It is compatible with Windows and can be used on GNU/Linux using mono. Mission Planner can be used as a configuration utility or as dynamic control supplement for your autonomous vehicle.


To download and install software please refer to the relevant documentation for details.


Mission Planner is a Windows application. You can use APM Planner on GNU/Linux. To download and install APM Planner please refer to the relevant documentation for details.

You can also run Mission Planner on GNU/Linux under Mono.

Mono, the open source development platform based on the .NET Framework, allows developers to build cross-platform applications with improved developer productivity. Mono’s .NET implementation is based on the ECMA standards for C# and the Common Language In Common Language Infrastructure.

The below instructions show how to install Mission Planner on GNU/Linux using mono.

Add the Mono repository to your system

sudo apt install gnupg ca-certificates
sudo apt-key adv --keyserver hkp:// --recv-keys 3FA7E0328081BFF6A14DA29AA6A19B38D3D831EF
echo "deb stable-bionic main" | sudo tee /etc/apt/sources.list.d/mono-official-stable.list
sudo apt update

sudo apt-key adv --keyserver hkp:// --recv-keys 3FA7E0328081BFF6A14DA29AA6A19B38D3D831EF
sudo apt install apt-transport-https ca-certificates
echo "deb stable-xenial main" | sudo tee /etc/apt/sources.list.d/mono-official-stable.list
sudo apt update

Install Mono

sudo apt install mono-complete

Add yourself to dialout group on Ubuntu - be sure to replace username with your actual username in GNU/Linux.

sudo usermod -a -G dialout username

Download the zip version of Mission Planner.

Create folder and extract the zip file.

mkdir ~/missionplanner
unzip -d ~/missionplanner/ MissionPlanner*

Launch Mission Planner.

cd ~/missionplanner
mono MissionPlanner.exe

Required parts

The tutorial is set up for quadcopter but it is applicable for all types of frames. To follow along, the following parts will be needed:

Please contact your supplier for ordering information. Alternatively, customers can choose to manufacture the needed cables/plugs on their own in order to suit some custom needs, in which case they should refer to the relevant documentation for details.


Connect all of the on-board UAVCAN devices into a chain and make sure the bus is terminated at the end nodes. The order in which the ESCs are connected/chained does not matter.

Image source []

Configuring ESC

UAVCAN devices are generally Plug'n'Play you will still need to enumerate (assign index/number) each of the ESC used in your vehicle and set their direction so that they can be identified/controlled by ArduPilot Mission Planner. To enumerate the ESC you can either use the UAVCAN GUI tool via UAVCAN bus or Kucher via USB link (for myxa only).


Connect all ESCs into a chain with Babel.

Open the UAVCAN GUI tool, apply local node ID and then launch the dynamic node ID allocation server.

All connected ESCs will appear as nodes. Double click on the node to open its properties window.

Click on button Fetch All to fetch all parameters of the node.

Enumerate ESC and set the direction of the motor by writing into the following configuration parameters.



Repeat this process for all other ESCs.


To download and install Kucher please refer to the relevant documentation for details.

Connect Myxa with a computer using a micro USB cable.

Open Kucher, select Port and press Connect button to establish a link between Kucher and Myxa ESC.

Enumerate ESC and set the direction of the motor by writing into the following configuration parameters.



Repeat this process for all other ESCs.

Configuring the Pixhawk with APM firmware

Open Mission Planner application.    

Attach Pixhawk with computer using the micro USB cable and then click on connect button.

Open the tab CONFIGRATIONS then select  Full Parameter List  and search for CAN parameters.

Turn on CAN and UAVCAN stack by setting the parameters  CAN_D1_PROTOCOL and CAN_P1_DRIVER to 1.

Bitmask the number of attached ESC to RC out channels to be transmitted as ESC over UAVCAN by setting the parameter  CAN_D1_UC_ESC_BM

Click on button Write Params to write all parameters to the controller. Disconnect serial port and reboot flight controller.

After that, your Myxa is ready to use. The CAN status LED on Myxa will turn on solid green. You can use ESC telemetry for debugging or checking the status of the attached Myxa. For that open, the tab FLIGHT DATA then select tab Status.

By default, safety switch parameters and pre arm flight checks are enabled. Failing to accomplish any one of the conditions will result in unable to arm the controller or mission planner will not unlock myxa for safety reasons.