Page tree
Skip to end of metadata
Go to start of metadata

This page describes how to connect Zubax devices via USB to PC that run old versions of Microsoft Windows. This page applies only if you're running Windows version 7 or 8. Windows 10 and newer do not require any manual configuration – everything should work out of the box.

Download the INF file

Save the following file to your computer.

zubax.inf

Ensure that the downloaded file is named zubax.inf; if not, rename it.

Install the INF file

Right-click the downloaded file and select "Install". Follow the dialogs.

If installation fails due to missing digital signature, please follow the instructions provided on this page: http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/how-to-install-a-driver-that-does-not-contain/7c3f299b-3483-4c96-8c44-87c7451af222.

Once the installation is finished, reboot the computer.

Connect the device

Connect your device to the computer via USB. It should be recognized by the operating system now. If that didn't happen, please seek advice on the Zubax Forum.