Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »


This tutorial demonstrates how to flash Zubax GNSS 2 using Dr. Watson on a bunker laptop.

Required parts

The following parts will be needed:

  • 1 x Zubax Babel
  • 1 x Dronecode Probe v2.3
  • 1 x UAVCAN Micro patch cable
  • 1 x DCD-M Cable
  • 1 x UAVCAN/CAN Micro termination plug
  • 3 X Micro USB cable Type B

Connecting

Connect all hardware to bunker laptop.


  • Connect DroneCode Probe to the debug connector.
  • Connect CAN to the first CAN1 connector on the device; terminate the other CAN1 connector.
  • Connect USB to the device.



Flashing

Use demsg command to find out the port number of Zubax Babel.



From the Dr Watson root directory ( /zubax_gnss/tools/drwatson) execute.

sudo ./drwatson_zubax_gnss.py /dev/ttyACM0

Note: Passed argument should be the serial port number of the attached Zubax Babel



After that follow the on-screen instructions to complete the flashing process.








  • No labels