Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


If pertinent, consider consulting with automated propulsion system configuration software such as or rc-calculators. 

The projected maximum electrical speed of the motor shall not exceed the maximum electrical speed of the ESC. For Telega-based ESCs, the maximum electrical speed is 100000 eRPM, or 1.6 kHz.


Before mounting the motor on the test stand, the sensors of the stand must be calibrated. Refer to the relevant documentation for the description of the setup and calibration procedure. For reference look at the RC Benchmark Thrust stand calibration procedure.  

Mount the motor with the propeller attached on the test stand and calibrate the encoder/tachometer.